+91 8617752708

British Journal of Applied Science & Technology, ISSN: 2231-0843,Vol.: 13, Issue.: 3

Original-research-article

Process Safety Management in Plasma Experiment and Generation System

 

Daniel Bondarenko1 and Hossam A. Gabbar1,2*

1Faculty of Engineering and Applied Science, University of Ontario Institute of Technology (UOIT), ON, Canada.

2Faculty of Energy Systems and Nuclear Science, University of Ontario Institute of Technology (UOIT), ON, Canada.

Article Information
Editor(s):
(1) Rui Xiao, School of Energy and Environment, Southeast University, China.
Reviewers:
(1) Hilda Esperanza Esparza Ponce, CIMAV-Chihuahua, Mexico.
(2) M. E. Medhat, Nuclear research Center, Cairo, Egypt.
(3) S. Santhosh Kumar, Pondicherry University, India.
Complete Peer review History: http://sciencedomain.org/review-history/12430

Abstracts

The Experimental Plasma Generation System (EPGS) is proposed for studying and investigating plasma behavior in vacuum conditions and under the influence of the varying boundary conditions. Furthermore, (EPGS) is intended to verify the computational models with the physical data. The safety design of EPGS takes into consideration the target safety system design, input parameters, output parameters, measurement techniques, and the fault propagation scenarios with respect to the Process Safety Management (PSM) via the IEC 61508. Also, the design of the Target Real Time Safety System (TRTS) for EPGS will be explained in relation to its primary experimental functions. The TRTS will be simulated using Simulink, with errors randomly generated at key cracking points, and the shut down procedure will be executed based on the deterministic algorithm for the Real Time Safety Verification (RTSV). In the nutshell, the cumulative outcome of the current work is to provide a design for plasma experimentation device that will have scalable properties in both the physical parameters, as well as the safety parameters.

Keywords :

IEC 61508; PSM; plasma safety simulation and management; plasma device design; safety oriented design.

Full Article - PDF    Page 1-15

DOI : 10.9734/BJAST/2016/22559

Review History    Comments

Our Contacts

Guest House Road, Street no - 1/6,
Hooghly, West Bengal,
India

+91 8617752708

 

Third Floor, 207 Regent Street
London, W1B 3HH,
UK

+44 20-3031-1429